User Login
MSA#อุปกรณ์สำหรับงานเฉพาะทาง ACCESSORY - Transfastener™ and Removable Transfastener
MSA#อุปกรณ์สำหรับงานเฉพาะทาง ACCESSORY - Transfastener™ and Removable Transfastener
รหัสสินค้า : 97-0803
General Information
Only 8mm / 5/16” 1x19 construction stainless steel construction cable falling in the limits 7.92mm to
8.32mm (0.312” to 0.327”) should be used.
For the attachment of 1 user only
Users must wear full body harness
Must not be used on inclined systems above 15° or vertical cable.
Temperature range -30°C (-22°F) to +50°C (122°F)
Approvals
BS EN 795:2012 Class C
ISO 9001 & ISO 14001
Quality control
100% dye penetrant & x-ray inspection of all cast components.
XRF batch inspection of critical components
100% dynamic gauge inspection for operation
Transfastner range static batch conformance test to 20kN for 3 minutes
Overhead travelling device batch conformance test to 15kN for 3 minutes
CE marked (category iii)
หมวดหมู่ : 61-อุปกรณ์สำหรับงานเฉพาะทาง ACCESSORY
แท็กที่เกี่ยวข้อง
-ราคา : พิเศษ 109,600 บาท
QRcode for Product
- Product Details / รายละเอียดสินค้า
- STANDARD / มาตรฐาน
- Documentation / เอกสารแนบสำหรับประกอบการพิจารณา
- Video / วีดีโอ
- item code
- Operating instructions / ขั้นตอนและคำแนะนำการใช้งาน
Transfastener Attachment Devices
General Information
For use with MSA Latchways engineered horizontal lifeline systems
Attach karabiner directly to harness front connection point. Do not increase the supplied connector length
by interlocking additional karabiners.
85080-00, Standard
Attachment and removal of the Standard Transfastener from the
system is via an entry terminal P/No’s. (85020-00 standard)
(85090-00, 85260-00 85262-00 & 85551-00 screw-gate type)
85085-00, Removable
Removable Transfastener can be attached at any point in the
system without the need of entry/exit components.
Attachment requires the gate to be positioned to one side: inserting
the cable between the starwheels & locating the cable in the body
recess; sliding gate to opposite side & withdrawing the cable from
the body recess allowing the cable to locate on the underside of
the slipper, between the starwheels. Secure the Transfastener by
fitting the karabiner through the gate & body
Always ensure the gate and the body are in the closed position &
secured by the karabiner with a minimum width / diameter of 10.0
mm before use.